WRDZ 380V Lights And Lightning AC Power Surge Protector

Surge Protective Device:
AC T1 Type 275/385v limp 15kA 4P
Contact Now
WRDZ 380V Lights And Lightning AC Power Surge Protector
power surge protector
lightning surge protector
lightning spd
power surge protector, lightning surge protector
lightning surge protector, lightning spd
  • 10/350μs, 8/20μs sparkgap
  • Single-pole lightning current arrester, pluggable
  • Adopt hermetical GDT trchnology, high follow current
  • extinguishing capability
  • Extremely low voltage protection level
  • Double terminals for parallel or series(V-shape)
  • connection
  • Multifuntional connection for conductors and busbars
  • Green window will change to red when fault occurs,
  • also provide remote alarmterminal at the same time
Type WR-T1-AC / 4P
Rated voltage (max.continuous a.c.voltage) [ Uc ] 385V or 275V
Lightning impulse current (10/350) [ lImp ]  15kA
Nominal discharge current (8/20) [ ln ] 50kA
Voltage protection level [ Up ] ≤1.8kV
Follow current extinguishing capability at UC  [ If ]  32A fuse will not be triggered at 2kArms 255V
Response time [ tA ] ≤100ms
Max.backup fuse(L) 200A gL/gG
Max.backup fuse(L-L') 125A gL/gG
TOV voltage 335V/5sec
Operating temperature range (parallel wiring) [ Tup ] -40℃...+80℃
Operating temperature range (through wiring) [ Tus ] -40℃...+60℃
Cross-sectional area 35mm² solid / 50mm² flexible
Mounting on 35mm DIN rail
Enclosure material Purple (module)/light gray (base) thermoplastic,UL94-V0
Dimension 2 mods
Test standards IEC 61643-1; GB 18802.1; YD/T 1235.1
Certification CE  ROHS  ISO9001  CQC  TUV
Type of remote signalling contact Switching contact
Switching capacity a.c 250V / 0.5A
Switching capacity d.c 250V / 0.1A; 125v/0.2A; 75v/0.5A
Cross-sectional area for remote signalling contact Max. 1.5mm² solid / flexible
Packing uint 1pc(s)
Weight 384g

380V light and lightning AC power surge protector circuit diagram