T1T2 2P ln20kA Iimp7kA lmax50kA 275V-385V SPD

  • Type:Type1+2
  • Pole:2P
  • Uc:275V/385V/440V
  • limp:7KA
  • ln:20kA
  • lmax:50kA
Contact Now
  • 10/350μs,8/20μs sparkgap
  • Single-pole lightning current arrester, pluggable
  • Adopt hermetical GDT trchnology, high follow current
  • extinguishing capability
  • Extremely low voltage protection level
  • Double terminals for parallel or series(V-shape)
  • connection
  • Multifuntional connection for conductors and busbars
  • Green window will change to red when fault occurs,
  • also provide remote alarmterminal at the same time
  • For using high-performance MOV and maximum
  • will up to 10/350 7kA
Type T1T2-AC / 2P
Rated voltage (max.continuous a.c.voltage) [ U ] 275V/385V/440V
Lightning impulse current (10/350) [ lImp ]  7kA
Nominal discharge current (8/20) [ ln ] 20kA
Maximum discharge current [ Imax ] 50kA
Voltage protection level [ Up ] ≤1.5kV≤1.8kV/≤2.0kV
Follow current extinguishing capability at UC  [ If ]  32A fuse will not be triggered at 2kArms 255V
Response time [ tA ] ≤100ms
Max.backup fuse(L) 200A gL/gG
Max.backup fuse(L-L') 125A gL/gG
TOV voltage 335V/5sec
Operating temperature range (parallel wiring) [ Tup ] -40℃...+80℃
Operating temperature range (through wiring) [ Tus ] -40℃...+60℃
Cross-sectional area 35mm² solid / 50mm² flexible
Mounting on 35mm DIN rail
Enclosure material Purple (module)/light gray (base) thermoplastic,UL94-V0
Dimension 2 mods
Test standards IEC 61643-1; GB 18802.1; YD/T 1235.1
Certification CE  ROHS  ISO9001  CQC  TUV
Type of remote signalling contact Switching contact
Switching capacity a.c 250V / 0.5A
Switching capacity d.c 250V / 0.1A; 125v/0.2A; 75v/0.5A
Cross-sectional area for remote signalling contact Max. 1.5mm² solid / flexible
Packing uint 2pc(s)
Weight 210g

Wholesale power supply 275V lightning protection AC energy surge protector circuit diagram